Plate
Hot rolled and stainless plate, cut to size, with mill test certificates on every heat.
Plate that arrives flat and on dimension
Thickness tolerance and flatness decide whether plate is usable. Both are checked before it is packed.
We supply hot rolled plate in structural and pressure grades, and stainless plate in 304 and 316L, from 3 mm to 150 mm. Plate is sheared or plasma cut to your drawing, with the cut edge condition recorded on the inspection sheet. Pressure applications carry their EN 10204 3.1 certificate per heat, traceable back to the rolled coil.
- 3 mm to 150 mm thickness
- Structural, pressure and stainless grades
- Sheared or plasma cut to drawing
- EN 10204 3.1 certificate per heat
Plate sizes held in stock
Common thicknesses are ready to cut; heavier sections follow the mill rolling schedule.
Hot rolled plate A36 / S355JR
6–100 mm, 2000 × 6000 mm, sheared to size
Stainless plate 316L
3–50 mm, No.1 finish, pickled and annealed
Pressure vessel plate P355NH
8–60 mm, EN 10028-3, 3.1 certified
Specification summary
Ask for the full datasheet where your application needs properties outside this range.
Thickness: 3–150 mm · Width: up to 3000 mm · Length: up to 12000 mm · Standard: GB/T 709, EN 10025, ASTM A36 · Certificate: EN 10204 3.1 · Cutting: shear, plasma, waterjet on request
Related product lines
Building Materials & Steel Rebar
Structural Steel
Pipe
Stainless Steel
Non-ferrous Metals
Send the thickness list and the cut drawing
We will confirm stock availability, cutting lead time and freight to your port in one reply.